Search results

  1. T

    Back to A. Blair

    Just wondering what that you like better about expediting over t/t?
  2. T

    Where to get a

    Sometimes you can luck up and find a deal on Ebay.
  3. T

    Rigmaster owners...

    Who would normally have a good price and selection if someone wanted to buy an Onan generator?
  4. T

    XM

    I had the same problem with my Roady II. Had accidently changed the setting.As mentioned above it needs to be set on direct entry. You can call xm and they will lead you through it. Or if you have a Roady II: press the preset/direct button (located about midway across the top of the unit) until...
  5. T

    XM

    Which mini unit are you talking about? Something like a Roady or something else?
  6. T

    Am I The Only One???

    MOOT! MOOT! MOOT! MOOT! MOOT! MOOT!
  7. T

    Routing

    It is a great route. DOT frequents the Christiansburg bypass alot. Don't be alarmed to see 10-12 officers working both the east and west bound side. Watch your speed through there, the bears stay hungry.
  8. T

    Kevin Rutherford

    I have been using the OPS for over a year. It does work very well. I took Kevin's "CMC" course 2 years ago. Some of his suggestions has worked for me and some would not work for my application. He specializes in Class 8 applications and has not really experienced much with the Class 7.
  9. T

    Norfolk/Hampton Roads, VA Bch VA.

    If you are planning to go through the midtown tunnel headed towards ODU or the Naval Stations, that road is closed to thru trucks from 8pm until 7am. There is a truck route posted to go around it for that time period. Watch for the NO TRUCK (far left) lanes through there too. They can get expensive.
  10. T

    Your APU

    I had the same problem a couple of years ago with a Rigmaster. I replaced the factory "squeeze type" fuel hose clamps with a better clamp and didn't have that problem anymore. Also noticed that the fuel line seemed to loose its flexibility pretty quick and was flairing out at the hose clamps...
  11. T

    Your APU

    Are some of you having a problem with the Rigmaster staying primed??
  12. T

    COE Pete Expediter

    I have seen some COE's in Va. that came out of Canada. I took pictures of the truck but didn't get the carrier's name.
  13. T

    TAG axle

    If you are in the area, I just had one installed @ Truck Body Corp. in Lynchburg, Va. They done a great job at a fare price. 800-828-6492
  14. T

    Help us welcome our new Moderator.. JohnO!!

    He is now to be called, Mr. John. What a guy! :)
  15. T

    Hampton Tunnel In Virginia

    The sensors are not 100 % accurate. I have been stopped on several occasions. They will check your height again when they stop you at the check station. If anyone is close to max height and set off the alarm, try dumping your air bags (if you have em) while you are pulling into the check...
  16. T

    generators

    Yes Butch, the unit is running fine. When I purchased the unit from you it had 780 hours on it. If you owned it for four months... that means that it ran for a total of 32.5 days within that four month period. I guess the hour meter on the unit (the one under the bunk) is a piece of crap too...
  17. T

    generators

    >Hi All, I have a Rigmaster on my 2001 sterling that has >over 6500 Hrs on it and it runs Great. If you are an OOIDA >member you will save $300.00. > As for the Executive Air======RUN AWAY,Don't Walk. >I had one and it turned out to be a Boat Anchor. I can say >this because it cost...
Top