Proheat gen4

[bigrig]

:Hello drivers! First time using a forum,so bear with me. Has any body had the problem when you turn on the heat it throws the 20amp breakers. When I turn on the fan only its ok. Sometimes it will take a half hour to kick off and other times only a few minutes.If anybody knows what it would take to fix this problem let me know. Thanks Bigrig

 

[moose]

a Pro-Heat that can't Heat ...
wonder what the AC like ...

Welcome to the EO family .
(I have no idea , but i guess you know it by now...)




Moose.

 

[bigrig]

This unit was installed 4 weeks ago and the ac hasn't been charged yet.

 

[bigrig]

Forget to mention,it was a used unit,but worked great till two days ago

 

[gotta go]

Are you trying to use the heat on low or high? Mine kicks off the breaker when it's on high. When I asked at Carrier I was told that they are designed to do that. Hopefully that will give you a starting place. If you don't have a dealer directory shoot me a p.m. and I'll help you find a shop close to where you are.

 

[highway star]

They built it with a mode of operation that doesn't work? Did they, or could they, explain that in a way that made sense?

 

[gotta go]

They built it with a mode of operation that doesn't work? Did they, or could they, explain that in a way that made sense?

Sorry Kim, as usual I didn't explain fully. The heater will work on high, but you don't have 110v at that setting. I think it's to prevent you from putting too much of a load on the unit at once, no microwave, tv, computer at the same time. My pro-heat, when its working, keeps it plenty warm in the low mode.