SHARP327
Veteran Expediter
Has anyone had success in stopping water from getting into Alumibunks frame mounted side boxes?
I've adjusted the latchs added weather stripping even removed the edge weather stripping that came on the box and siliconed the inside of the weather strip and reinstalled it to make sure that water wasn't seeping through there! I've even gone as far as drilling 1/8" holes to let the water drain out in the inside rear of each box!
The only real thing that helps keep my stuff from getting wet is the use of plastic bins I purchased from the hardware store.
The only other place I can see that may be letting water in is around the rivets on the bottom of the doors, and so far I've not come up with a way of sealing them if in fact that's where the water gets in.
Has anyone out there had any luck with this problem?
I know of other owners who have complained of this problem and all are upset and have no remedy either.
Thanks Alot!!!
I've adjusted the latchs added weather stripping even removed the edge weather stripping that came on the box and siliconed the inside of the weather strip and reinstalled it to make sure that water wasn't seeping through there! I've even gone as far as drilling 1/8" holes to let the water drain out in the inside rear of each box!
The only real thing that helps keep my stuff from getting wet is the use of plastic bins I purchased from the hardware store.
The only other place I can see that may be letting water in is around the rivets on the bottom of the doors, and so far I've not come up with a way of sealing them if in fact that's where the water gets in.
Has anyone out there had any luck with this problem?
I know of other owners who have complained of this problem and all are upset and have no remedy either.
Thanks Alot!!!