Tools ???
- Thread starter buddy
- Start date
I would start with any and all tools related to the pulley system, alternator and hoses. That would be stuff you can do yourself in most cases.
Include spare alternator,some hoses and of course belts and related hardware clips, clamps.
Include spare alternator,some hoses and of course belts and related hardware clips, clamps.
On Time Express, Inc.
734-837-3990
Advertiser
On-Time Express, Inc. Established in 1995. On Time Express has learned that driver satisfaction is one of the key factors to long-term success and growth. In an industry where time and safety are critical, we are committed to providing our drivers with every advantage possible. It is crucial that any Owner-Operator representing On-Time Express, In ... Apply Today!
Yeah the usual things like socket set (as compact as possible), hammer, set of screw drivers, pliers, assortment of combo wrenches and a pry bar or two and you should be set. Should all fit into one portable tool box and maybe the socket set case besides. Any more and you're hauling weight. This should allow you to change belts, hoses and such that ovm mentioned as well as do the lights etc.
Rob
Rob
ebsprintin
Veteran Expediter
In addition to the basic mechanical tools. Hammer and/or mallet. If you don't carry a claw hammer, have a way to pull nails, like fence pliers or prybar w/claws and small saw. Small saw. The saw can be a small, folding pruner or keyhole saw as long as you can cut through a 4x4. Comes in handy if you have to rig something to secure a load. Fence pliers or the right kind of sheetmetal shears--something that will cut through heavy wire, nails, stranded cable. I don't like to wait at delivery for the customer to find a tool to cut a heavy seal--I have the tool available for them to use. Tape measure at least the length of your cargo hold. It also doesn't hurt to write various dimensions of your cargo hold on the floors and walls.
It would be interesting to weigh your tool chest of recommended tools after a couple pages of everyone's "don't leave home without it" favorite tools. I had one company tool list that was obviously an add-as-you-go list that had to weigh 300 lbs.
eb
It would be interesting to weigh your tool chest of recommended tools after a couple pages of everyone's "don't leave home without it" favorite tools. I had one company tool list that was obviously an add-as-you-go list that had to weigh 300 lbs.
eb
ebsprintin
Veteran Expediter
As for torx fasteners if your vehicle has them. I carry a torx combo tool. It's not great for doing real work, but it will do most jobs in a marginal sort of way. I then get a dedicated torx tool as I run across regular jobs that require it. So on my vehicle a t-20, 25, 27, and 30 handle just about everything I do.
eb
eb
greg334
Veteran Expediter
It all depends. It also depends on what you drive, a truck or a van.
The tools are only as good as the person using them. If the person doesn't know a screw driver is or how to properly use it, it is useless.
With that, the person's ability to do anything mechanical matters too. I know of two members who have a great collection of tools but they can't figure out how to change the dome light in their van.
There was a post a while ago that had lists of people's tools but I am not up to searching for it.
The tools are only as good as the person using them. If the person doesn't know a screw driver is or how to properly use it, it is useless.
With that, the person's ability to do anything mechanical matters too. I know of two members who have a great collection of tools but they can't figure out how to change the dome light in their van.
There was a post a while ago that had lists of people's tools but I am not up to searching for it.
Below is a link to an article Bob Caffee wrote earlier this year.
Expediters Online.com - The Expedited Freight Information Center
Expediters Online.com - The Expedited Freight Information Center
Dakota
Veteran Expediter
I like the tool kits that come in a case and have a little bit of everything. I usually buy the cheap sets(ie made in China) since they aren't gonna be used everyday. The good tools stay at home
Have a pair of large channel locks and Vice Grips, and a nice assortment of screwdrivers and your pretty much set!!!
Have a pair of large channel locks and Vice Grips, and a nice assortment of screwdrivers and your pretty much set!!!
ebsprintin
Veteran Expediter
Dakota, I do sort of the opposite. The tools I have in the vehicle are the most likely tools that I will really need to be dependable.
eb
Dakota
Veteran Expediter
Those rechargeable LED lights with a magnet are nice
How about a disposible lighter to check your fuel level
dieselwrench
Seasoned Expediter
I always have everything but what I need, and what ever I want to use is always on the bottom of the pile.
Even though I'm not a licensed Mechanic I have allways made repairs and PM's on all my vehicles. However I have discovered that the owner we will be driving for wishes us not to do any repairs or pm's excluding light bulbs and such.
Wow, This will be another change I need to adjust to.
You all have been just great for your replies..
I will bring along some "100mph tape" aka duct tape.
Wow, This will be another change I need to adjust to.
You all have been just great for your replies..
I will bring along some "100mph tape" aka duct tape.
On Time Express, Inc.
734-837-3990
Advertiser
On-Time Express, Inc. Established in 1995. On Time Express has learned that driver satisfaction is one of the key factors to long-term success and growth. In an industry where time and safety are critical, we are committed to providing our drivers with every advantage possible. It is crucial that any Owner-Operator representing On-Time Express, In ... Apply Today!