Espar diagnostics
- Thread starter scottm4211
- Start date
Doesn't look like it has enough digits for anything but trouble codes but I really have no idea 
it would be news to me if I could use my 7 day timer to do the same thing...but I'd like to know too
it would be news to me if I could use my 7 day timer to do the same thing...but I'd like to know too
Yes hold in the top two buttons at the same time fore several seconds until it says da. Release and it will scan and display error codes. You can Google espar codes to find what they mean.
To clear codes hold the bottom two buttons in at the same time until you see it display something, I do not remember what. Sometimes clearing codes can allow the unit to work.
I suggest writing down error codes before clearing incase you need to go to a shop.
Do both of the above with the unit in the on mode
To clear codes hold the bottom two buttons in at the same time until you see it display something, I do not remember what. Sometimes clearing codes can allow the unit to work.
I suggest writing down error codes before clearing incase you need to go to a shop.
Do both of the above with the unit in the on mode
Ok but hours run from da? Does the espar even track hours?
Thx...not much you can do for PM I guess it's either broke or not
I'd go with xiggi's suggestion. I was thinking press the button with the 3 snakes that have the triangle heads. Then swipe the snakes left toward the fan thing to chop off their heads and then press an up or down arrow to take out the trash.
What does the PM cover? And how much does it cost?
Thanks. Starting to weigh my aches and pains from DIY against paying somebody to get things done
Scott you have the Digi controller. Check this link: http://www.rixens.com/wp-content/uploads/2013/04/Digi-Controller-Manual.pdf
Thank you Squire
