I'm currently an owner operator (tractor-trailer) looking to retire soon. Looking at part-time expediter opportunities to basically fund travel for a decade or two. Have plenty of cash reserves to buy a new Ford Transit Van, but am on the fence about pallet carrying capacity. Spec'd Transit van has a cargo length of 13.85', so I could potentially fit 3 pallets. Have full interior layout worked out in CAD software so that the sleeper could be temporarily converted to fit three pallets and still sleep comfortably.
My question: Is there any advantage to having capacity for the third pallet? Is there a need for that much capacity in the cargo van segment? Specs are below, if that helps. Any advice or thoughts are appreciated!
2016 Transit Van XL 350
Extended Length
High Roof Height
3.2L I5 Diesel Engine
3.31 Limited Slip Axle
6-Speed SelectShift® Automatic Transmission - O/D
Single Rear Wheel (Body Code: W3X)
Gross Vehicle Weight Rating: 9500 GVWR
Payload: 3,640 lbs
Towing: 4,200 lbs
My question: Is there any advantage to having capacity for the third pallet? Is there a need for that much capacity in the cargo van segment? Specs are below, if that helps. Any advice or thoughts are appreciated!
2016 Transit Van XL 350
Extended Length
High Roof Height
3.2L I5 Diesel Engine
3.31 Limited Slip Axle
6-Speed SelectShift® Automatic Transmission - O/D
Single Rear Wheel (Body Code: W3X)
Gross Vehicle Weight Rating: 9500 GVWR
Payload: 3,640 lbs
Towing: 4,200 lbs
Last edited: