want to put xm in sprinter. Is there an easy way to get to the aux in back of raido ? how do you get the raido out ? need advice please
sprinter parts
Go to that page and you'll see the two things you need:
Removal keys Sound 20/30 only
Part# 1184.989
Sound 20 / 30
Aux input Part# 5002.826
The Removal Keys you can find at Walmart or Autozone, but they need to look like the ones in the picture. They're really cheap. I got a radio removal set that had those, and I think one or two other different kinds in it, I'm pretty sure from Walmart. You shove them into the slots in the lower left and right of the radio, jam 'em in there good, and they will trigger the spring that holds the radio in. Then just slide the radio forward.
The Aux Input cable plugs into the back of the radio and the other ends are two standard female RCA jacks. You then plug in a regular audio cable with two male jacks into the ends of the Aux Input cable, and one male jack on the other end goes into the XM receiver. Running the cable from the Aux Input cable to the XM receiver can be tricky, but if you remove the console cover (shifter, door lock buttons, etc,) you can feed it up through that way, over along the right side of the radio.
I cut small notches (filed them with a file, I think) into the edge of the console cover so the cables (audio and power) could easily go down into the console, and the cables are all hidden. It took 15-30 minutes total start to finish, IIRC. Hardest part was getting the cable fished down the right of the radio down into the console void, but once you realize it's a pretty wide open area it's pretty easy.