dock high sprinter

geo · Apr 23, 2010

i now have a dock high sprinter
your wondering how do you make a dock high sprinter
add pallets to raise the load up to height you need than
push it to back

need 5 pallets to raise it to right height
last night had to raise it one more pallet high as they can't reach that from the dock
so took 4 straps and put under the pallet and than put the ends of strap in etrack than worked the strap to height need to put the pallet under the load to make it dock high
my model is if i can get it on i can get it off

greg334 · Apr 23, 2010

Huh?

You put the pallets under the van?

Lawrence · Apr 23, 2010

Pictures please George.....

Steady Eddie · Apr 23, 2010

I think he put them under the load. I've used two before to get the load past the wheekwells

greg334 · Apr 23, 2010

Steady Eddie said:
I think he put them under the load. I've used two before to get the load past the wheekwells

Are these like wheeknees?

Sorry I had to read it three times to get it. I think I've been around too many people on pain killers.

Turtle · Apr 23, 2010

Try sticking 5 pallets under freight that's already 68 inches tall.

I have had it happen a couple of times where I was delivering to a dock high facility, and the only way to get the freight out was to place an empty pallet on top of the freight, then secure the empty top pallet to the bottom pallet with metal banding or lashing straps, then have the forklift go into the upper pallet and raise up and suspend the freight while I drove forward with the forklift holding onto the freight. Once I was clear, the forklift raised the freight up and placed it on the dock. Easy.