I didn't use Rmax branded foam, but I did use the blue board foam that Lowes carries. Used the foam board for the larger areas, filled in with canned foam for the places the board foam couldn't cover, and Reflectix bubble pack to cover it all, secured with 3M spray and Loctite PowerGrab adhesives, and then used foil tape to seal it all.
Only on the driver's side rear door, because I stupidly filled it with mostly canned foam, which retains moisture instead of letting it drain out the bottom like it's designed to do, and has thus rusted out the bottom seam and the areas around the license plate.Have you had any condensation or water issues?
I think it's the crappy German steel that vw used in the 60'sThx for all the replies, I was also worried about condensation trapped between the insulation and van. I've seen several vans with rusted side walls and wondered if insulation was the cause.